Site Currently Under Construction





BOILER & COOLING TOWERS
ANTIMICROBIALS
BOILER WATER TREATM9ENT
COIL CLEANERS
COOLING TOWER TREATMENT
DEFOAMER
FUEL OIL TREATMENT
SYSTEM DESCALERS and CLEANERS
SEWER PRODUCTS
BACTERIA/ENZYMES
DEGREASERS/DEODORIZERS
FLOCCULENTS
LIFT STATION CLEANERS
WATER TESTING/CONTROL

BOILER & COOLING TOWERS

ANTIMICROBIALS

CWT300 POLY-QUAT® - Algaecide and Microbicide # AWT-0372 USDA: G7
This low foaming product is used to control algae, bacteria and microbiological slime in recirculating commercial and industrial water cooling towers, air washers, and swimming pools.
pH: 6.0.


CWT-325 CARBAMATE® Algaecide and Microbicide #AWT0375
This product is used in industrial/or commercial recirculating cooling water systems to control algae, bacteria, and fungi. This liquid biocide has an extremely high dilution range; as little as 53 ppm as an initial slug and 18 ppm in subsequent treatment is all that is needed to control microbiological growth. An excellent product to use as an alternating microbiocide through automatic metering systems when algae strains have become resistant to the other algaecides. Dilution 18-109 ppm. pH: (100ppm) 8-10.


HVAC/R PAN STRIP #AWT-374
HVAC/R Pan Strips are for use in drain pans of many cooling units such as air conditioner, humidifiers, and refrigerators. Controls foul smelling odors caused by mildew, fungi, bacteria, and slime. For use in hotels, motels, schools, colleges, hospitals, nursing homes, and airports. Effective against odor-causing bacteria. HVAC/R Pan Strips are a controlled release product that easily fit into air conditioner or refrigerator drip pans or the water tank of humidifiers or dehumidifiers. Because of the controlled release mechanism, HVAC/R Pan Strips will last for up to six months effectively maintaining clean water and inhibiting the foul odors caused by mildew, fungi, bacteria, and slime. HVAC/R Pan Strips provide a pleasant odor as they work. Not for use in heat vaporizing or automizing type vaporizer humidifiers. 12 STRIPS PER CASE. Use rate: 1 strip. PH(100 ppm) 8-10.


WEEDTROL® Aquatic Algaecide and Herbicide #AB00-586
This Diquat Dibromide based (4.35%) productís diversity ranges from eliminating aquatic growth to effectively controlling undesirable above ground vegetation. This product can be applied as an aquatic algaecide and herbicide without harm to fish or wildlife when used according to label instructions. This water base, nonselective contact herbicide is for land use to provide top kill of green vegetation. Deactivates in two weeks or less. Dosage Varies.


TOWER TABLETS #AWT-373
Controls bacteria, fungi, and algae in industrial cooling water systems and auxiliary water and waste water systems. Controls slime-forming bacteria and fungi in industrial air-water systems. One table treats 1000 gallons of water for 3-4 weeks. 25 DBNPA tablets in an 11 pound package. pH (100 ppm) 8-10.



BOILER WATER TREATMENT

BWT-100® BOILER SCALE INHIBITOR #AWT-206 USDA: G6
Same formula as AWT-208 below, but without condensate line corrosion control amine. Formulated for applications where condensate treatment is prohibited, not required or where separate injection is preferred. May be used as a 2-drum treatment with AWT-230. pH: 13.0.


BWT-101® BOILER & CONDENSATE LINE TREATMENT #AWT-208 USDA: G6
Complete scale and corrosion control for steam boilers in a single package. Includes sulfite for oxygen pitting, polymers and phosphonates for scale inhibition and an amine for condensate line corrosion control. May be used with softened or high hardness make up waters. This high performance polymer formula protects systems operating with high make up rates. Higher dosage rates may be effectively employed for ìon lineî cleanups, with no attack on boiler metal. Dosage: Varies. pH: 13.0.


BWT-102 OXYGEN SCAVANGER® #AWT-210
Liquid blend of sulfite formulated to prevent oxygen pitting and general corrosion in boilers and industrial systems. Used to boost sulfite residuals in systems being treated with WT-206 or WT-208. Dosage: Varies. pH:12.0.


CLT-100® CONDENSATE LINE CORROSION INHIBITOR #AWT-230 USDA: G6
Dual neutralizing amine blend for condensate line corrosion control. Neutralizes carbonic acids which form in steam boiler condensate lines. Use with WT-206 or to boost WT-208 treatment levels. Dosage: Varies. pH: 12.0.


RP-747® - HOT OR CHILLED CLOSED LOOP TREATMENT
#AWT-235
Closed loop corrosion and scale inhibitor. Used in chilled and hot loops, hot water boilers and radiators. Systems should be cleaned with WT-935 prior to treatment. Dosage: 1:200 pH: 12.0.


CWT-8000® - CONCENTRATED #AWT-360 USDA: G7
An advanced liquid scale and corrosion inhibitor for use in open recirculating cooling water systems. Maintains clean scale and deposit-free surfaces for system life and efficiency. Provides effective scale control in systems with highly alkaline scaling markup waters. Dosage: 1-8000 pH 1-2.


BOILER CARE® Steam Boiler Treatment #S4983 USDA: G6
All-in-one drum steam boiler treatment for large boilers where steam-line treatment is not appropriate. High dilution usage makes this product economical. Inhibits rust, corrosion, pitting, scale, and sludge. Dilution Rate: 1:2000.


BOILER COMPLETE 2000® Steam Boiler Treatment #S4939 USDA: G6
All-in-one drum treatment for large boilers where protection of the steam and return lines is desired. High dilution usage makes this an economical product. Protects against rust, corrosion, pitting, scale, and sludge. Dilution Rate: 1:2000.


BOILER DESCALANT Inorganic Acid #S4139 USDA: G6
A 100% active concentrate for use in removing hard water deposits from boiler tubes. Can be used on fire tube or water tube boilers. Dilution Rate: Follow lab recommendations.


BOILER DISPERSANT PLUS On-line Boiler Descaler #S4109 USDA: G7
Removes deposits from boiler tubes when used with standard boiler treatment while the boiler is operating as normal. Does not contain acid. Dilution Rate: 1:5000.


BOILERITE 100® Boiler Treatment #S4104 USDA: G6
This polymer treatment has been formulated for use in steam boilers hardness control, corrosion control, reaction with oxygen, and high heat transfer. Dilution Rate: 1:1000


CLEAN STEAM® Steam Boiler Treatment #S4115 USDA: G6
Specially designed for steam boilers used in dry cleaners & laundries. Prevents pitting, rust, scale, and sludge in boilers. Protects the steam and return lines from rust and corrosion due to carbonic acid attack. Dilution Rate: 1:250.


CLOSED SYSTEM TRACER Closed System Treatment #S4101
Contains rust inhibitors to protect all of the different metals in closed loop systems. Provides a color indicator for easy testability. Dilution Rate: 1:300.


HIGH BOILER TREATMENT Boiler Treatment #S4113
A boiler water treatment designed for the treatment of high hardness, high alkalinity water. A combination of polyphosphate and two co-polymers ensures complete scale inhibition. Prevents pitting and rusting. Provides maximum protection of steam and return lines. Dilution Rate: 1:1000.


ITM 600® Boiler Treatment #S4135 USDA: G6
A polymeric boiler water treatment designed to prevent rust, corrosion, pitting, scale and sludge. This boiler treatment will accommodate a wide range of boiler sizes as well as a wide range of conditions. Contains steam and return line treatment. Dilution Rate: 1:600


LIQUID OXAWAY® Oxygen Scavenger Adjunct #S4134 USDA: G6
Add to standard boiler treatment to boost sulfite levels to ensure protection against rust and pitting. Good for wet lay-up of boilers during off season. Dilution Rate: 1:5000.


MOLY TREAT® Closed Loop Treatment #S4102
A complete treatment for closed chill loops and closed hot water boiler loops. Designed to inhibit rust, corrosion, pitting, sludge and scale. Dilution Rate: 1:300.

POLY Polymer Dispersant #S4120 USDA: G7
Specially designed to inhibit deposits of silica and iron. Excellent calcium inhibitor as well. High concentration makes it economical to use. Dilution Rate: 1:5000.


RESIN CLEANER Water Softener Resin Cleaner #S4941
Cleans away rust and grease from water softener resin to prevent fouling. Extends life of resin by keeping it free of contaminants. Ensures complete regeneration of softener resin. For industrial use only. Dilution Rate: 1:1000.


SUPER ALKALINITY BOOSTER Steam Boiler Treatment #S4147 USDA: G6
Highly concentrated alkalinity and pH booster with built-in dispersants for additional scale inhibition. Convenient liquid. Economical to use. Dilution Rate: 1:5000.


SUPER CONCENTRATE 5000® Steam Boiler Treatment #S4105 USDA: G6
Concentrated for economical usage. Provides maximum protection against scale, sludge, rust, corrosion, and pitting. Does not contain steam line treatment. Dilution Rate: 1:5000.


SUPER STEAM Steam & Return-Line Treatment #S4130 USDA: G6
Triple amine protection to prevent rust and corrosion in steam and return lines. Good for short, medium, and long steam-lines. Stops carbonic acid formation. Dilution Rate: 1:5000.

SYSTEM PRE-CLEAN Cleaner for Boilers & Towers #S4103 USDA: G6
Cleans boilers, cooling towers, and closed loops before they are put into operation. Removes oils, greases, flash rust, mill scale, mud, and other contaminants. Also prepassivates metal to prevent initial rust. Dilution Rate: 1:1000. pH; 12.0+/-0.5.



COIL CLEANERS

COIL BRITE® Coil Cleaner #AWT-412 USDA: Pending
A blend of high performance acid detergents designed for heavy duty cleaning and brightening of condenser cooling coils, fins and other equipment surfaces. High foaming cleaning action pushes dirt, lint, greases, and oils out of coils. For good maintenance and equipment efficiency use two times per year. Use alkaline ìCoil Cleaner II periodically to remove grease and oily soils. This product is nonflammable, non-oily and effective in water with up to 500 ppm hardness. It is very effective on heavy oxidation and oily dirt, yet maintains its free rinsing qualities. Use Rate: Varies. pH:<1.0.

COIL CLEANER II® #AWT-417 USDA: P1
A blend of high performance alkaline detergents and penetrants designed for heavy duty degreasing, cleaning of condenser and evaporator coils, fins and other equipment surfaces. For good maintenance and equipment efficiency, use monthly or as required to keep grease, oil, dust, lint, etc. off the unit. Nonflammable, non-oily and effective in water with up to 500ppm hardness. Very effective on heavy grease and oily dirt, yet maintains its free rinsing qualities. Condensate rinseable on evaporator coils. Surfactants in this product are biodegradable. Use Rate: Varies. pH: 13.0.


COILITE® Coil Cleaner #S6732
A heavy-duty concentrated coil cleaner, which leaves a protective coating on the coils to aid in preventing dust, dirt, and other types of bacteria-bearing soil from accumulating for up to 3 months. Dilution Rate: 1 part concentrate to 3 parts water. USDA: P1, A4. pH: 9.0-10.0.


COOL AIDE® Coil Cleaner #S6744
This non-corrosive coil cleaner has built-in 24-hour protection that lasts up to 3 months. Dilution Rate: Ready to use. pH: 13.0/-0.5.



COOLING TOWER TREATMENT

AIR WASH TREATMENT Air Wash Treatment #S4957
Keeps spray nozzles clean, inhibits rust, prevents sludge build up. Specifically designed for air wash units. Contains an anti-stat. Dilution Rate: 1:500. pH: 9.0+/-0.5.


COOL & CLEAN ® Cooling Tower Treatment #S4969
Specifically designed for treatment of hard water. Inhibits rust and corrosion of the metals in cooling tower systems. Easy testability. Economical to use. Dilution: 1:1000. pH: 13.0+/-0.5.


CWT-500® COOLING TOWER CORROSION & SCALE INHIBITOR #AWT-340
An advanced liquid scale and corrosion inhibitor for use in open recirculating cooling water systems. Maintains clean, scale, deposit and corrosion free surfaces which are required for system life and efficiency. This is accomplished with one easy to use product. Provides effective scale and corrosion control in systems with corrosive make-up waters. Dosage: 1-500. pH: 10. USDA: G7.


CWT-2000® COOLING TOWER CORROSION & SCALE INHIBITOR #AWT-350
An advanced liquid scale inhibitor for use in open recirculating cooling water systems. Maintains clean, scale and deposit-free surfaces for system life and efficiency. This is accomplished with one easy to use product. Provides effective scale control in systems with highly alkaline scaling makeup waters. Dosage: 1:2000. pH: 1-2. USDA: G7.


8000-N-1 TOWER TREATMENT® Cooling Tower Treatment #S4953
Designed to treat high hardness cooling tower water. High dilution rate makes this product very economical to use. Six gallons replaces 55 gallons of regular strength treatment. Also, used in cooling towers rated at 1000 tons or more. Easy testability. Dilution: 1:8000. pH; 12.0+/-0.5.


GUARDIAN-5® Cooling Tower Microbiocide #S4964
This non-corrosive coil cleaner has built-in 24-hour protection that lasts up to 3 months. Dilution Rate: Follow lab recommendations. EPA regulated. pH: 7.0-8.0.


GUARDIAN-10® Cooling Tower Microbiocide #S4966
A highly concentrated cooling tower microbiocide for use with recirculating water in cooling tower and industrial air-washing systems. Dilution Rate: Follow lab recommendations. EPA regulated. pH: 7.0-8.0.


SUPER TOWER CONCENTRATE® Cooling Tower Treatment #S4949
Concentrated so that 5 gallons is equal to 55 gallons of regular strength product. Prevents scale and sludge in cooling towers. Inhibits rust and corrosion. Dilution: 1:5000. pH: 12.0+/-0.5.


SYSTEM PRE-CLEAN® Cleaner for Boilers & Towers #S4103
Cleans boilers, cooling towers, and closed loops before they are put into operation. Removes oils, greases, flash rust, mill scale, mud, and other contaminants. Also prepassivates metal to prevent initial rust. Dilution Rate: 1:1000. pH: 12.0+/-0.5.


TOWER DESCALANT® Inorganic Acid - Powder #S4970
This 100% active descaler is used to remove mineral deposits and scale from cooling towers. Dilution: Follow lab recommendations. pH: 1.2 in a 1% aqueous solution.


TOWER GUARD NC® Cooling Tower Treatment #S4951
Complete protection of towers and chillers. Inhibits rust, scale, and corrosion. Contains a special biodispersant. Dilution: 1:600. pH: 13.0+/-0.5.


TOWER PLETE BP-A® Cooling Tower Treatment #S4948 USDA: G7
A unique, well-balanced, cooling tower treatment that does not contain chromates, heavy metals or other materials potentially harmful to the environment. Controls rust, scale, corrosion and build up of deposits in the tower and condenser. Dilution: 1:1000. pH: 12.0+/-0.5.


TOWER WASH® Cooling Tower Cleaner #S4945
Add directly to the cooling tower to ensure clean heat transfer surfaces and to remove mud and sludge. Dilution: 1:1000. pH: 4.5 +/-0.5.


TOWERCIDE 5® Cooling Tower Microbiocide #S4944
This product is used to control algae, bacteria and fungi in recirculating water-cooling towers. Dilution: Follow lab recommendations. EPA regulated. pH: 5.6-6.0.


TOWERCIDE 10® Cooling Tower Microbiocide #S4946
Highly concentrated product used to control algae, bacteria, and fungi in recirculating water-cooling towers. Dilution: Follow lab recommendations. EPA regulated. pH: 5.0-6.0.


TT-333® Cooling Tower Treatment #S4962
This polymer tower treatment is specifically designed for towers with a capacity of 500 GPM or larger. Used as an all in one treatment it will control rust, scale, hardness and corrosion as well as suspended particle accumulations in towers, pumps and condensers. Dilution: 1:2000. pH: 12.0/-0.5.


ULTRA-KLEAN® Tower Wash #S4961
Ultra-Klean is designed to clean away mud, sludge, and slime from cooling tower systems. It contains non-ionic and anionic surfactants, polymers and organic detergents. High dilution usage makes it economical to use. Dilution: 1:10,000. pH: 4.0+/-0.5


W.T.C. ALGAECIDE® Quaternary Algaecide #S4952
Concentrated algaecide for industrial recirculating water-cooling towers. When used as directed it will aid in controlling and/or preventing the development of unsanitary algae slime conditions which are unsightly, produce foul odors and which are often the cause of equipment breakdown. Dilution: Follow lab recommendations. EPA regulated. pH: 6.0-8.0.



DEFOAMER

EDF-3® Silicone Emulsion Defoamer #AWT-418 USDA: G7
This product is a silicone anti-foam emulsion that will control foam in a wide variety of aqueous systems. Applications include industrial processes, cooling towers, boilers, waste streams and treatment facilities. EDF-3 is a non-hazardous organosilicone emulsion. It is highly effective in controlling foam in all types of process water systems created by a broad range of conditions. Dosage: Varies. pH-7.



FUEL OIL TREATMENT

AM FIRE® Fuel Oil Treatment #AWT-760
Multi-functional fuel oil additive. Prevents sludge and deposit buildup in storage tanks and on burner tips, and minimizes corrosion in tanks and lines. Increases combustion of impurities at lower temperatures and increases overall combustion efficiency. In Preburner Systems: Prevents the formation of sludge, sediment and water in storage tanks. Inhibits the corrosion of fuel oil storage tanks. Improves viscosity. Keeps fuel system free of sludge, varnish and rust. Prevents deposits of sludge and rust in heaters. Prevents plugging of strainer, burner tips, and nozzles. In Fireside Systems: Catalyzes combustion. Reduces the need for excess air. Prevents slag formation and fouling of superheater and reheater. Protects against high temperature and cold end corrosion. Minimizes SO3 formation. Retards formation of vanadium slag. Increases thermal efficiency of boilers. Reduces soot and carbon deposits on heat transfer surfaces. Flash 141&Mac176;F(TCC)


CONSERVE® Fuel Oil Treatment #S6241
A fuel oil additive to aid in obtaining maximum operating efficiency of oil burners and storage tanks. Designed to dissolve sludge build-ups as well as emulsify condensate moisture. Will also control storage tank, line, filter and burner corrosion. For use with Fuel Oil numbers 1-6 and Bunker C. Dilution Rate: 1 gallon to 600 gallons fuel oil.



SYSTEM DESCALERS AND CLEANERS

ACID NEUTRALIZER #AWT-317 USDA: Pending
This product is a concentrated blend of alkali and dispersing and passivating agents that provide economical neutralization for acidic cleaning solutions. Use Rate: Varies. pH: 13+.


DESCALER 2 #AWT-316
High activity blend of acids, corrosion inhibitors and synergistic wetting agents. Designed to effectively and economically remove scale deposits from heat exchange equipment surfaces. It contains a ph sensitive color indicator to help control descaling process.


SYSTEM CLEANER #AWT-935
A concentrated triple application polymer product. Prevents and removes accumulations for scale, corrosion and organic matter in a wide range of open ended closed recalculating cooling and heating water systems. An excellent choice for online and new installation clean-up jobs. Properly applied and controlled, it will dissolve or disperse a broad range of mineral and organic foulants. Formulated to provide corrosion protection to system metals. In old and heavily fouled systems, deposits are removed slowly to prevent system plugging. For old and heavily fouled systems, clean up time can range from weeks for closed loop systems to several months for heavily scaled cooling towers. This product contains no acids or heavy metals. Dosage: Varies. PH: 13+.



SEWER AND WASTE WATER

WASTEWATER TREATMENT- Municipal Treatment #JEC-510
High performance municipal formulation. When used on a regular schedule, it allows more waste to be treated without equipment breakdowns and back ups. Dilution: As Needed



BACTERIA/ENZYMES

ACCELERATE® Biological Waste Degrader #S6848
A bioaugmentation product engineered to reduce the Biological Oxygen Demand and increase the rate of organic sewage breakdown. Increasing breakdown reduces the malodors associated with waste pits and stabilization ponds used on meat producing farms. This product can be used on pork producing farms and cattle feed lots. Dilution Rate: See product label. pH: 8.5-9.0.


B.A.C.® Bacteria & Enzyme/Surfactant #S6803 USDA: L2
A stable, liquid suspension of enzymes and microorganisms capable of breaking down complex proteins, starches and fats at an accelerated rate. Excellent at eliminating unpleasant odors found in restrooms. Also recommended for use in septic tanks, grease traps, porta-toilets, recreational vehicles, and drain lines. Dilution Rate: Ready to Use.


BACTERIAL SEPTIC SAVER #V174
An acid-free septic system treatment that does its work through bacterial action. It is designed to break-down sewage waste inside the system without using harsh chemicals that destroy natural bacteria needed for your septic system to work properly. Contains both aerobic and anaerobic bacteria. Safe for all types of plumbing. pH: 7.


BIG CRITTERS® Industrial Strength Enzymes #J30-320
This is a heavy-duty product for the toughest jobs. Ideal for municipal sewage systems and lagoons. Green liquid containing 400 billion ìcrittersî per gallon. Dilution: As needed.


BIO BLOCK RIM CAGES® Non-Para Deodorant Block #S8521
A non-para deodorant block formulated with bacteria and surfactants that attack, eat and digest organic matter that cause restroom odor. The activated bio-culture continues working in your drain, saving time and money on drain maintenance. Bio Blocks also aid in the breakdown of organic matter in a septic tank. Bio Blocks contain an average of 3 billion bio-cultures per block. Dilution Rate: Ready to Use.


BIO BLOCK SCREENS® Non-Para Deodorant Block #S8519
A non-para deodorant block formulated with bacteria and surfactants that attack, eat and digest organic matter that cause restroom odor. The activated bio-culture continues working in your drain, saving time and money on drain maintenance. Bio Blocks also aid in the breakdown of organic matter in a septic tank. Bio Blocks contain an average of 3 billion bio-cultures per block. Dilution Rate: Ready to Use.


BIODIGESTER® - #S4544
BioDigester is part of the Bioremediating Floor Care System designed to work in tandem with BioCleaner (see Degreasers), to degrade petroleum hydrocarbons, oils, greases, and other stubborn organics in oil/water separators and other waste collection systems. Dilution Rate: Ready to Use.0


BIO-ENZYMATIC COIL CLEAN #J50-397
This product is a safe, easy to use, non-acid coil cleaner. It naturally removes stains, odors, mold, mildew and fungus from air conditions, heat pumps, refrigerators, ventilators, ice machines and other environments. Pleasant aroma. Dilution: 1 part with 3 parts water.


BIO-ZYME #S6830
Bio-Zyme is designed to function synergistically as a biological augmentation to the processes of natural waste degradation. In addition to the diastatic, proteolytic, amylolytic and lipolytic activity of our other products, Bio-Zymeís unique formulation has an added catalyst which allows overnight degradation of toilet tissue. Bio-Zyme is great for septic tanks, cesspools, marine application, drain fields, portable toilets and holding tanks.


COMPOST ACCELERATOR® Compost Digestant #JEC-550
Consistent use of this product reduces waste volume in landfills. It can help recycle yard waste into rich, nutrient heavy, compost. Heat is generated within the compost pile, reducing odors and size within six weeks. Dilution: 25 pounds per 1000 cubic yards.


CONCENTRATED ENZYMES® Formulatorís Concentrate #JEC-330
Formulated for our export and formulator customers. Just add water and save on freight costs. 1 Trillion per gallon! Dilution: 1 part with 10 parts water.


DAW GON® Pet Odor Eliminator #S6813
Daw Gon eliminates the foul odor created by dog or cat urine. The digestive process of bacteria and enzymes allows this product to eliminate odors on carpet, surfaces and materials not harmed by water. The malodor is first neutralized with a pleasant fragrance, then the specially selected strains of enzyme producing bacteria digest waste to destroy the source of the odor. Effective on animal odors, smoke, vomit, urine, and odors caused by mold and mildew. pH: 8.5-9.0.


DRAIN MAINTAINER - Natural Drain Opener #JEC-310
Non-Hazardous, all natural drain opener and maintainer. Works best when left overnight. Cleans and opens sluggish drains and pipes. No fumes. Dilution: 2 oz per drain.


DRAIN SAVER #V175
Specially designed for use in drains, grease taps and garbage disposals. The bacterial action will break down food, grease and other organic buildup inside drain lines. Used as directed, it will keep drain lines, garbage disposal units and grease taps clean, free flowing and odor-free. Safe for all types of plumbing.


EASY TABS - Enzymatic Tablets #J50-396
Easy Tabs are solid enzyme tables that offer the end user a simple, convenient method of applying bacteria and enzymes to marine toilets, recreational vehicles, buses, portable toilets, and airplanes. Dilution: ready to use.


ENZYME DRAIN MAINTAINER #V107 USDA Authorized
Safe and odor free powdered bacteria cultures and enzymes blended for drain and sewer maintenance. Use in septic, cesspool, and sewage disposal systems. Dissolves most organic material.

FARM DIGESTANT® Livestock treatment #JEC-520
Powerful digestant formulation with free enzymes for animal manure pits, lagoons, farms, slurrystore, feedlots and pens. Helps keep operations incompliance by removing malodors, reducing the build-up of solids. Dilution: As needed.


FOODPLANT DIGESTANT® Food Process Treatment #JEC-530
This is a unique digester for meat, poultry fruit, vegetable, and other food processors. Contains cellulase and bacteria to reduce odors, maintain drains, and treat wastewater. Dilution: As needed.


GREASE TRAP DIGESTANT® Grease Trap Treatment #JEC-540
Helps food service establishments remain in compliance with federal, state, and local regulations. Utilizes Lipase to ride grease traps of heavy grease cake layer. Dilution:&Mac189; pound weekly.


GREASE TRAP MAINTAINER® Commercial Tap Opener #JEC-320
Designed to save food service establishments costly pump outs. When used as a daily maintenance product, it eliminates grease cakes, stoppages and malodors.


HYDROLYTIC ENZYME #S6877 USDA: L2
An economical scientifically blended concentrate of cultured bacteria and enzymes that will digest and liquefy organic wastes. Use to unclog sinks, drains, and grease traps. Dilution Rate: Ready to Use.


IT SPARKLES® Bio-Enzymatic Solution #S6802 USDA: C1
ìSparklesî is todayís bio-enzymatic solution to yesterdayís problems associated with acid and caustic bowl and bathroom cleaners. The selection of specialized bacterial strains and chemical cleaners are specifically designed to destroy the source of reoccurring odor. In addition, using ìSparklesî will make your bowl, urinal, sink and shower walls sparkle like never before. Dilution Rate: Ready to Use. pH: 8.5-9.0.


LIGHTENING BUGS® Fluorescent Enzymes #J50-390
The newest in enzymes technology. This enzyme product opens drain lines, septic tanks and grease traps but with one added feature; a fluorescent dye is added for ease in tracing the progress and flow of the enzyme action. 100 Billion colony-forming units per gallon. Dilution: As needed.


LITTLE CRITTERS® Liquid Enzymes #J50-310
A highly effective liquid enzyme product designed to be used by municipalities, institutions and industries. Use to open clean and maintain septic tanks, feeder lines, and grease traps. Contains 200 billion ìcrittersî per gallon. Dilution: As Needed.


NATUMATE® - Drain Opener #V125
An effective and safe drain opener that consists of enzymes, stabilizers and surfactants to liquefy most organic solids including greases, fats, oils, foods, paper and towels. Designed to be used as a drain maintainer.


NRBC® No Rinse Bathroom & Kitchen Cleaner #JEC-340
A concentration of bacteria and enzymes that safely cleans and removes malodors from bathroom and kitchen surfaces. Perfect product for tile, grout, and porous floors. Dilution: 1 part with 1 part water.


PORTABLE TOILET TREATMENT® NATURAL TOILET TREATMENT #JEC-350
A powerful portable toilet treatment that performs malodor removal on marine systems as well. Contains a color strength indicator. Dilution: 1 part with 10 parts water.


SUPER ENZYMES #V120 USDA Authorized
A 50% Stronger formulation of product # V107. Safe and odor free powdered bacteria cultures and enzymes blended for drain and sewer maintenance. Use in septic, cesspool, and sewage disposal systems. Dissolves most organic material.

.
SYSTEM 1 DRAIN MAINTAINER® 8 Strain Blend #BIO-100
System 1 is a bioenzymatic formulation specifically designed to promote accelerated grease liquefaction and digestion. This unique bioformulation combines patented scientifically developed grease digesting bacteria with selected fat-splitting crude enzymes to achieve the ultimate bioformulation for difficult grease problems. System 1 liquifies and digests fats, oils, and greases much faster than most other competitive formulas. Bacterial Count: 100+ billion/gal. pH: Neutral. Liquid Form.


SYSTEM 2 DRAIN MAINTAINER® Powder #BIO-200
Same as System 1 but in powder form. Bacterial Count: 5 billion/gram. pH: Neutral.


SYSTEM 4® ORGANIC ODOR CONTROLLER #BIO-400
System 4ís synergistic biostrain provides excellent breakdown of starches, carbohydrates, tissue, fats, grease and oils. This translates into quick and thorough removal of pet stains and odors, urine, feces and virtually any organic odor source. Our research efforts have produced an unsurpassed, safe, natural solution for many types of organic waste, odor and stain problems. Bacterial Count: 100+ billion/gallon. pH: 8.2-8.8.


SYSTEM 6® COMPOST ACCELERATOR #BIO-600
System 6 is a bioenzymatic formulation (bacteria/enzyme blend) specifically designed to promote accelerated and controlled decay of organic wastes. These materials range from grasses, manures, leaves, twigs, hay, moss, greases and other organic food wastes. This unique bioformulation combines patented scientifically developed waste digesting bacteria with selected fat-splitting crude enzymes to achieve the ultimate bioformulation for accelerating the composting process. Dilution: 1 part to 16 parts wate
r

THE SURVIVORS® #S6840 USDA: C1
A revolutionary new approach to waste elimination and grease trap maintenance. This microbiological breakthrough allows the natural ability of bacteria/enzymes to digest and degrade waste. Different than other common waste degraders; It is bleach, alkali, disinfectant, heat (up to 203&Mac186;F), and chlorine resistant. Dilution Rate: Ready to Use. pH: 8.5-9.0.


2-N-1 AUTOMATIC DRIP SYSTEM® Drip System Cleans Pipes #JEC-360
A pleasantly scented product that when used as a toilet drip system product, also maintains clog free drains. The powerful bacteria-free enzyme product clears all pipes of organic debris. Great for multi-story building. Dilution: 1 part with 1 part water.


UNI BOL® With Enzymes #V2600- Pink Spice #V2602-Blue Spice #V2604-Green Apple
Contains acid stable enzymes. A complete toilet maintenance system in one product. Cleans and deodorizes toilet bowls continuously for an average of 30 days. Easy to install and replace one-piece design. pH-1% sol=3. USDA: Pending.


UNI TAB® SMALL WITH ENZYMES
#V2624-Blue Spice, #V2608-Green Apple #V2617- Pink Spice
Contains acid stable enzymes. Single piece design eliminates the need for separate screens and blocks. It provides continuous urinal maintenance for an average of 30 daysócleans and deodorizes. pH-1% sol=3.

UNI TAB® LARGE WITH ENZYMES
#V2624-Green Apple, #V2625-Pink Spice, #V2626-Blue Spice
Contains acid stable enzymes. Same product as UNI TAB SMALL WITH ENZYMES except with a larger screen.



DEGREASERS/DEODORIZERS

BIO-SYN #AR232 USDA: C1
Heavy-duty industrial liquid deodorant and odor counteractant that chemically neutralizes sulphur and nitrogen based odors, the source of most noxious odors. Excellent for use in sewage plants, fee lots, rendering plants, pig and chicken farms, etc. May be diluted up to 1:30 with water for treatment of drain lines, garbage disposals, trash cans, refuse containers, etc. Leaves a pleasant fragrance. This water-soluble product can be used for most odor problem application. Dilution: 1:30. pH: Neutral.


CITRA-SYN #AR-612 USDA: C1
A concentrated citrus scented product that will effectively and thoroughly check foul odors with excellent solvent, degreasing and emulsifying properties. To be used in rendering plants for industrial waste, garbage disposal areas, kennels, stables, septic tanks and dead animals. This product is designed to liquefy sewage greases and oil in addition to providing excellent odor control properties. This versatile product may be applied by a number of methods and may be used for malodors from industrial, agricultural and institutional wastes. Dilution 1:20 ñ 1:100


G.B. BREAKDOWN® Floating Grease Solvent #S6685
A floating grease and scum solvent. Extremely effective in dissolving scum blankets and grease balls in lift stations, sewer lines, and wet wells. Dilution Rate: Ready to use.


LIMO SOL #AR-625 USDA: C1
This advanced formula degreaser/deodorizer utilizes the best available natural materials to keep pace with todayís environmental regulations. Powerful all organic, biodegradable, solvents are specially blended to outperform most conventional petroleum based solvents, and have the added advantage of being water dilutable. The multipurpose concentrate instantly emulsifies grease, oils, and fats without the use of harsh acids, caustics/alkalines, petroleum distillates, butyl solvents, chlorinated solvents, or ozone depleters. This organic butyl solvents, chlorinated solvents, or ozone depleters. This organic extract based product has an extremely powerful and pleasant natural citrus fragrance to deodorize effectively even under the most extreme conditions. The vapors from this product leave the area smelling clean and orange. The combined degreasing/deodorizing ability makes it an excellent choice for maintaining drains, grease traps, and other sewer/septic applications as well as for treating dumpsters, trash receptacles, sewer plants, garbage trucks, and more. Dilution: Varies. pH: 10.0. Flashpoint: 115&Mac176;F.


LIMO SOL II #AR-626 USDA: C1
This product is a nearly identical formulation to AR-625 Limosol but has a higher viscosity and is more economical to use. Dilution: varies ph 7.0+ Flashpoint 115&Mac176;F.


ODO-ROUT® Liquid Deodorant #S6889 USDA: C1
A highly concentrated water emulsifiable solvent for positive protection against accumulation of grease, sludge and odors in drains, grease traps, cesspools, septic tanks, chemical toilets and sewage plants. Dilution Rate: 4 parts concentrate to 100 parts water.


RED HOT SEWER SOLVENT® Granular Drain Pipe Opener #S6895 USDA: L1
A powerful granular sewer solvent which quickly clears blocked sewers and drain lines. Effective against grease, oil, fibers, sludge, and organic matter. Dilution Rate: Ready to use.


WHOMP® Liquid Alkali Drain Opener #S6899 USDA: L1
Liquid sewer and drain solvent that will clear stoppage caused by grease, oil, fibers, sludge and other organic matter in sewers. Dilution Rate: Ready to use.



FLOCCULENTS

AL-FLOC #AR-600
This highly concentrated, liquid, inorganic acid based product is formulated to e used as a primary flocculant. This product is intended to be used alone, or in conjunction with a secondary flocculant. This inorganic acid buffer the alkalinity by lowering the pH. It will help to deposit all alkaline sludge, helping to clarify wastewater. When use din sequence with R-608 or R609, the two flocculants synergize each other, thereby providing greater flocculating action. This convenient liquid form is readily soluble in hard, soft, hot or cold water. No waste, very economical. Dosage: Varies.


CAT-FLOC® Liquid Polymer Flocculant #S6880
Cat-Floc is designed for improving the clarification of settling solids and de-watering of industrial wastewater and municipal sewage system as an initial treatment. Cat-Floc increases the efficiency of clarifiers & thickeners by raising the solids content of the sludge to aid in de-watering. Used for both industrial and municipal wastewater effluent streams. Dilution: 50-500 ppm.


FLOC-IT® Polymer Flocculant #S6881
Floc-It is an easy-to-use and effective sanitary and storm sewer cleaner. Will assist in removing deposits that commonly restrict and/or plug sewer lines. Dilution Rate: Ready to use.


FLOC-IT II® Polymer Sand & Silt Flocculant #S6883
A highly concentrated flocculant polymer. Designed for both industrial wastewater and municipal sewage systems to provide improved clarification.


PRE-FLOC® Anionic, Liquid Flocculant #AR-608
This anionic, liquid flocculant is a high molecular weight polymer emulsion that is highly charge. This product may be used in primary, secondary, and intermediate treatment plants, and industrial water clarification plants. It may be utilized by any process system using sedimentation, flotation, centrifugation or filtration. Dosage: Varies. PH: 6.5-9.0.


SLUDGE-FLOC II® #AR609
Secondary cationic organic polyelectrolyte flocculant for wastewater treatment. This concentrated liquid flocculant may be used in the following types of installations: Primary Treatment Plants, Intermediate Treatment Plants, Secondary Treatment Plants, Refinery Waste and Industrial Water and Industrial Water Clarification and Conditioning. It may be utilized by any process system using sedimentation, flotation, centrifugation or filtration. The degree of mixing is selected on the basis of floc size and settling rate, the clarity of the treatment unit effluent or the rate of solids dewatering. Each process has its own water and wastewater variable, therefore dosage levels are merely recommendation for experimental starting points. Dosage: Varies. pH: 4.0-5.0.



LIFT STATION CLEANERS

BREAK DOWN - Lift Station - Eliminates Grease/Scum Problems #AR-630
Sewer plant treatment chemical that floats on the water surface to effectively eliminate grease and scum problems throughout plant pumping stations, sewer lines and mains. Dissolves scum cake, revents solidification of grease. Low odor. No objectionable smell. Use rate: To maintain surface blanket. Flash Point: 114&Mac176;F (TCC).


EZ BLOCKS® Lift Station Enzymes #J50-395
EZ Blocks are powerful enzymatic blocks formulated with a high performance surfactant package. They are perfect for use in remote locations. Just place in the mesh bag. Dilution: 1 Block per 125,000 gal water.


LIFT-CLEAN® Lift Station Cleaner/Deodorizer #AR-602
Natural citrus-based lift station cleaner/deodorizer formulated for high performance. As raw sewage flows into lift stations wet wells to be pumped to treatment facilities, accumulation of debris must be removed or substantially reduced. Use Rate; To maintain surface layer. Flash point: 117&Mac176;F(TCC).


LSC-110® LIFT STATION CLEANER #AR-601
A cleaner that floats u and down with the rise and fall of station liquid level. Cleans soils, dissolves grease and oil, softens solid wastes and prevents disagreeable odors from escaping. Floating action provides cleaning activity to the sides of the lift station. Very economical, will last from 3 to 6 months under normal use conditions. Additional benefits of this unique product is its ability to seal or contain offensive odors which emit from the lift station. Use Rate; Add directly to lift station wells until a minimum of 6 inches is floating on lift well surface. FlashPoint: 110&Mac176;F (TCC).


MUD & SILT REMOVER® Lift Station #AR606
Concentrated liquid dispersant intended to break-up and dissolve clusters and clumps of mud, silt, sand, sediment, sludge, and clay so that this matter can be flushed through lines with normal water flow. Storm sewers, sanitary sewers, and sewer lines often become clogged with debris and normal flow is impaired or halted. Use of the product will chemically break-up these clumps of hardened matter into a liquid mixture of light weight, small, fluffy particles that are easily flushed through lines. Use Rate: 1 gallon for each 10,000 gallons of water in line. pH: 8.5.



WATER TREATMENT TESTING & CONTROL

AMPUMP #AAC-14265
Basic Boiler/Cooling Test Kit:
#AAC-1392
Chemical Injection Pump #AAC-1420
Complete Boiler/Cooling Test #AAC-1397
Nitrite Test for RP-747 #AAC-1394
Portable Battery Powered ph Meter #AAC-1395
Portable Battery Powered Conductivity Meter #AAC-1396
Tower Controller (ACT-102-C) #AAC-1410



Auto/Truck Maintenance| Floor Care | Insecticides | Lawn & Turf | Lighting | Safety
d'Limonene | Lubricants | Disinfectants | Degreasers | Cleaning Products | Featured Items
Deodorants | Tools | Facility & Maintenance Supplies | Water & Sewage | Winter Products | Home


Email us at solutions@biochemcorp.com

BIOCHEM CORPORATION OF FLORIDA
8300 Business Park Drive, Port St. Lucie, FL  34952
Phone: 772.879.1450 | Toll Free: 1.877.879.1450 | FAX: 772.879.3125


Terms of Site

Anthony Carrasco Creation Network©2000